|
|
|
Drive:
1/4"
Torque Range in. lb.:
5-50 in.lb
Incr. in. lb.:
0.01
Torque Range ft. lb.:
.4-4.2
Incr. ft. lb.:
0.001
Torque Range dNm:
5.6-56
Incr. dNm:
0.01
Torque Range Nm:
.56-5.6
Incr. Nm:
0.01
Torque Range Kg.Cm.:
5.7-57
Torque Range mkg.:
.057-.57
Incr. mkg.:
.001
Wt Lbs. (kgs):
1.5
Length In:
13.5
- Up to 4000 torque values can be stored in memory
- Downloading capability to a printer/computer datalogger via RS232
- Selectable modes of operation are “peak hold” and “track”
- Target torque values are easily programmed and viewed through the keypad
- A 9v alkaline battery is standard for 60 hours of operation
- Accuracy: ± 1% of indicated value, CW & CCW, from 20% to 100% of full scale; ± 1%, plus 5 increments from 10% to 20% of full scale
- All calibration data is stored in the microprocessor
- Selectable baud rate for downloading to a printer/computer/datalogger.Options are 300, 600, 1200, 2400, 4800, 9600, or 19200
|
|
|
|
CDI 501CI II Computorq II Electronic Torque Wrench 1/4" Dr 5-50 in. lbs. |
|
Item# 501CI II |
|
UPC# 662459263704
|
|
CDI 501CI II COMPUTORQ II Digital Programmable Torque Wrench with 1/4" drive. This state-of-the-art digital torque wrench has 5-50 in.lb torque range. It has many applications, including precision torquing of critical fasteners, tracking applied torque for quality control testing, as well as destructive component testing. The Computorq II is easy to program using the soft touch keypad. Simply program a target torque including upper and lower limits, and the wrench will signal with a beep when that torque setting is reached. If the user exceeds the target torque, an alarm tone sounds and the red light flashes.
Made in the USA.
|
|
