|
|
|
Drive:
3/8"
Torque Range ft. lb.:
2.08-20.83
In. Lb.:
25-250
Torque Range Nm:
2.82-28.25
Torque Range Kg.Cm.:
28-280.03
- Accuracy: ± 1% of indicated value CW & CCW, from 20% to 100% of full scale
- 3 step LED visual signal system
- YELLOW LIGHT = approaching target torque
- GREEN LIGHT = target torque reached
- RED LIGHT = over torque indicator
- Audible tone when desired torque is reached
- Alarm tone sounds if wrench is over-torqued
- Ergonomically designed wrench body
- Display can be turned 180 degrees to allow left hand usage
- Battery cover designed to be aviation FOD proof
- Holds “peak” torque reading for 10 seconds
- Constructed of special Capron® material for long life and durability
- Resistant to the majority of chemicals used in industrial environments.
- Wrench can be hung on tool board
- Bar graph displays orientation of torque application (left or right hand)
- Uses standard 9 volt alkaline battery
- N.I.S.T. traceable certificate of calibration include
- Meets or exceeds ASME B107.28 – 2005
|
|
|
|
CDI 2502ED Electronic Dial (ED) torque wrench 3/8" Dr 25-250 in. lbs. |
|
Item# 2502ED |
|
UPC# 662459945303
|
|
CDI 2502ED Electronic Dial Torque wrench with 3/8" drive and a 25-250 In.Lb. torque range. The new Electronic Dial (ED) torque wrench features solid state electronics for accurate torque application and measurement. EDs design provides easy set-up and usage. There is no need to look directly at the digital readout as the wrench has 3 indicating lights and an audible buzzer. The ED wrench is features 4 units of measure...ft lb, in lb, Nm, kg.cm.
|
|
