CDI Computorq 3 Electronic Torque Wrenches

CDI  COMPUTORQ 3 Electronic Torque Wrench from is simple to use torque wrench with a digital readout that displays real time torque values in any of four torque units, ft.lbs., in.lbs., Nm, kg.cm. Simply set the desired torque value and apply force until the green LED illuminates.

Great for light industrial, automotive, motorcycle, watercraft and aircraft applications.

Click Here to Download Detailed Product Information

As seen in VeloNews 2009 - Buyer's Guide [PDF]

 

 

 

• Sleek new design
• 15-degree fl ex ratcheting head
• Push button socket release head
• Large, easy to read digital display
• Long battery life, uses 2 each CR123 lithium batteries
• Ergonomically designed molded non-slip rubber grip
• Torques in both clockwise and counterclockwise directions
• Battery saving auto-shutoff after two minutes
• COMPUTORQ3 remembers last unit and torque setting selected
• Audible tone sounds when set torque value is reached, if the set torque value is exceeded, an alarm tone will sound.
• 3 color LED light bar YELLOW LED indicates approaching desired torque setting GREEN LED indicates desired torque value is reached RED LED indicates fastener was over-torqued, loosen and retighten.
• When desired torque value is reached, display will hold value and flash for ten seconds.
• COMPUTORQ3 will operate in any of four torque units, foot pounds (ft. lbs.), inch pounds (in. lbs.), newton meter (Nm) or kilogram centimeter (kg. cm.).
• ACCURACY:
  ± 2% CW of readings from 20% to 100% of full scale
  ± 3% CCW of readings from 20% to 100% of full scale
• N.I.S.T. traceable certificate of calibration included. HIGH ACCURACY 1 % Clockwise direction only.  It couldn't be easier to use!