The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

CDI 1/2" Dr 25-250 Ft Lbs / 33.8-338 Nm Computorq 3 Electronic Torque Wrench 2503CF3HA High Accuracy

1/2" Dr 25-250 Ft Lbs / 33.8-338 Nm CDI Computorq 3 Electronic Torque Wrench High Accuracy - 2503CF3HA

$477.97 $1,086.30
(You save $608.33)
Model #
2503CF3HA
Condition:
New
Drive Size:
1/2 Inch
English Range For This Tool:
25-250 Ft Lbs
Metric Range For This Tool:
33.8-338 Nm
Length:
27"
Weight Lbs:
2
Accuracy:
± 1%
Feature:
Flex Head
Scale:
Ft Lbs to 250
Scale:
Nm to 339

Description

1-cdi-logo.jpg

The CDI 2503CF3HA High Accuracy 1/2" Drive Computorq 3 Electronic Torque Wrench offers English Ranges in 25-250 Ft Lbs & 300-3000 In lbs and Metric Ranges of 33.8-338 Nm & 345-3456 KgCm.  The COMPUTORQ 3 Electronic Torque Wrench is a simple to use digital readout wrench that displays real time torque values in any of four torque units, ft.lbs., in.lbs., Nm, kg.cm. Simply set the desired torque value and apply force until the green LED illuminates.

 

Features:

  • Sleek design
  • 15-degree flex ratcheting head.
  • Push button socket release head.
  • Large, easy to read digital display.
  • Long battery life, uses 2 each CR123 lithium batteries.
  • Ergonomically designed molded non-slip rubber grip.
  • Torques in both clockwise and counterclockwise directions.
  • Battery saving auto-shutoff after two minutes.
  • COMPUTORQ 3 remembers last unit and torque setting selected.
  • Audible tone sounds when set torque value is reached, if the set torque value is exceeded, an alarm tone will sound.
  • 3 color LED light bar:
    • YELLOW LED indicates approaching desired torque setting
    • GREEN LED indicates desired torque value is reached
    • RED LED indicates fastener was overtorqued, loosen and re-tighten.
  • When desired torque value is reached, display will hold value and flash for ten seconds.
  • COMPUTORQ 3 will operate in any of four torque units, foot pounds (ft. lbs.), inch pounds (in. lbs.), newton meter (Nm) or kilogram centimeter (kg. cm.).
  • ACCURACY: ±1% CW of readings from 20% to 100% of full scale & ±3% CCW of readings from 20% to 100% of full scale.
  • N.I.S.T. traceable certificate of calibration included.
  • Drive: 1/2"
  • Torque Range in. lb.: 300 - 3000 in.lb
  • Torque Range ft. lb.: 25 -250
  • Torque Range Nm: 33.8 - 338
  • Torque Range Kg.Cm.: 345 - 3456
  • Length In. (mm) : 27 (686)
  • Wt. Lbs. (kgs): 3.5 (1.59)  

 cdi-computorq-display.jpg  

-made-in-the-usa.jpg

Warranty Information

Williams Industrial Tools Torque Products Warranty: Williams Industrial Tools warrants to the original purchaser of CDI Torque Products that the companys torque products are free from defects in workmanship and materials. Williams Industrial Tools will repair or replace CDI Torque Products which fail to give satisfactory service due to defective workmanship or materials (excluding calibration) for 12 months from the date of original purchase. Williams Industrial Tools warrants “initial, out of box calibration” of each new, unused CDI Torque Product. Repair, replacement or recalibration shall be at the election and expense of Williams Industrial Tools, and is your exclusive remedy in place of all other rights and remedies. Products must be returned with proof of purchase, freight prepaid, to a CDI Torque Products repair center for warranty service. Williams Industrial Tools will repair or replace Williams Torque Multipliers which fail to give satisfactory service due to defective workmanship or material for 90 days from the date of original purchase. Williams Industrial Tools does not provide any warranty for products subjected to abnormal use. Abnormal use includes misuse, accident, modification, unreasonable use, neglect, lack of maintenance, or use after the tool is significantly worn.