CDI 2401CI3 1/4" Dr 24-240 In Lbs Computorq 3 Electronic Torque Wrench

1/4" Dr 24-240 In Lbs / 2.7-27.1 Nm CDI Computorq 3 Electronic Torque Wrench - 2401CI3

$610.20 $283.99
(You save $326.21)
SKU:
2401CI3
UPC:
662459918710
Condition:
New

1-snap-on-industrial-brands-logo.jpg1-cdi-logo.jpg

The CDI 2401CI3 1/4" Drive Computorq 3 Electronic Torque Wrench from Snap-On Industrial Brands offers English Ranges in 2-20 Ft Lbs & 24-240 In lbs and Metric Ranges of 2.7-27.1 Nm & 27.6-276 KgCm. The COMPUTORQ 3 Electronic Torque Wrench is a simple to use digital readout wrench that displays real time torque values in any of four torque units, ft.lbs., in.lbs., Nm, kg.cm. Simply set the desired torque value and apply force until the green LED illuminates. Great for light industrial, automotive, motorcycle, watercraft and aircraft applications.

Features:

  • Sleek design
  • 15-degree flex ratcheting head.
  • Push button socket release head.
  • Large, easy to read digital display.
  • Long battery life, uses 2 each CR123 lithium batteries.
  • Ergonomically designed molded non-slip rubber grip.
  • Torques in both clockwise and counterclockwise directions.
  • Battery saving auto-shutoff after two minutes.
  • COMPUTORQ 3 remembers last unit and torque setting selected.
  • Audible tone sounds when set torque value is reached, if the set torque value is exceeded, an alarm tone will sound.
  • 3 color LED light bar:
    • YELLOW LED indicates approaching desired torque setting
    • GREEN LED indicates desired torque value is reached
    • RED LED indicates fastener was overtorqued, loosen and retighten.
  • When desired torque value is reached, display will hold value and flash for ten seconds.
  • COMPUTORQ 3 will operate in any of four torque units, foot pounds (ft. lbs.), inch pounds (in. lbs.), newton meter (Nm) or kilogram centimeter (kg. cm.).
  • ACCURACY: ±2% CW of readings from 20% to 100% of full scale & ±3% CCW of readings from 20% to 100% of full scale.
  • N.I.S.T. traceable certificate of calibration included.
  • Drive: 1/4"
  • Torque Range in. lb.: 24 - 240 in.lb
  • Torque Range ft. lb.: 2.0 - 20.0
  • Torque Range Nm: 2.71 - 27.10
  • Torque Range Kg.Cm.: 27.6 - 276
  • Length In. (mm) : 15 (381)
  • Wt. Lbs. (kgs): 2.0 (.91)

 cdi-computorq-display.jpg

-made-in-the-usa.jpg

Snap-On Industrial Brands Torque Products Warranty: Snap-on Industrial Brands warrants to the original purchaser of CDI Torque Products that the company’s torque products are free from defects in workmanship and materials. Snap-on Industrial Brands will repair or replace CDI Torque Products which fail to give satisfactory service due to defective workmanship or materials (excluding calibration) for 12 months from the date of original purchase. Snap-on Industrial Brands warrants “initial, out of box calibration” of each new, unused CDI Torque Product. Repair, replacement or recalibration shall be at the election and expense of Snap-on Industrial Brands, and is your exclusive remedy in place of all other rights and remedies. Products must be returned with proof of purchase, freight prepaid, to a CDI Torque Products repair center for warranty service. Snap-on Industrial Brands will repair or replace Williams’ Torque Multipliers which fail to give satisfactory service due to defective workmanship or material for 90 days from the date of original purchase. Snap-on Industrial Brands does not provide any warranty for products subjected to abnormal use. Abnormal use includes misuse, accident, modification, unreasonable use, neglect, lack of maintenance, or use after the tool is significantly worn.
Drive Size:
1/4"
Max Ft Lbs:
0-100 Ft Lbs
Max In Lbs:
101-500 In Lbs
Max Nm:
11.4-56.5 Nm
Length:
15"
Weight Lbs:
2
Accuracy:
± 2%
Feature:
Flex Head
Scale:
Ft Lbs
Scale:
In Lbs
Scale:
Nm
Scale:
KgCm

Videos Hide Videos Show Videos