The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

1/4" Dr 4 - 79 In Lbs Norbar ProTronic Plus Digital Torque Screwdriver - 130524

1/4" Dr 4 - 79 In Lbs Norbar ProTronic Plus Digital Torque Screwdriver - 130524

$1,647.00 $1,830.00
(You save $183.00)
Model #
Drive Size:
1/4 Inch Female Hex
English Range:
4-79 In Lbs
Metric Range:
.45-9 Nm
8.3 Oz
± 2%
In Lbs



The Norbar 130524 ProTronic Plus Digital Torque Screwdriver features a 4-79 In Lb English range and .45-9 metric range. The ProTronic is a high precision electronic torque screwdriver with a large backlit LCD display, that measures accurate and consistent torque readings. It also features an audible buzzer when pre-set torque/angle value is reached.  With an accuracy that exceeds the requirement of ISO6789 (±2%), the ProTronic Drivers are engineered to retain this accuracy over many thousands of tightened cycles


  • Large LCD screen with bright backlight; numbers become larger and bolder during active torque for optimal viewing
  • Four alert modes (LCD, progressive LED, audible, tactile) provide excellent feedback in all working conditions
  • 5 easily selectable torque units (N·m, lbf·ft, lbf·in, dN·m, kg·cm and kg·m)
  • A wide range of advanced features (cycle counter, customizable sleep timer, language selection, auto torque calculation for torque adapters, calibration alerts, battery level indication, and numerous alert mode customization) allow the user to tailor the tool to their work preferences
  • Torque THEN Angle mode gives the user the ability to conveniently apply an angle to a fastener directly after achieving a torque target without the need to remove the torque wrench from the application
  • Power interruption technology helps to prevent loss of work and continuity if the wrench is impacted
  • Handle designed for a comfortable and secure grip
  • Battery cap has been designed to prevent accidental loosening
  • Storage case included
  • Supplied with a traceable 'Calibration Certificate' allowing end users to adhere to more stringent quality control processes
  • Patent pending Torque AND angle combo modes allows the user to monitor torque and angle simultaneously
  • Works alongside newly developed app designed for instant downloading of readings
  • Up to 50 pre-sets can be programmed in the tool with the ability to lockout helping to ensure against unauthorized setting changes
  • Sequence programming and job modes allows the user to chain together pre-sets in a particular sequence
  • UKAS accredited torque calibration in both clockwise and counterclockwise direction
  • Exclusive 360° progressive LED ring for precise visual feedback
  • Set includes a T-handle for comfort when higher torque levels are required.
  • Settings allow for operation in either English, Spanish, French, German, Italian, Dutch or Portuguese
  • Angle accuracy of ±1% of reading, ±1° @ Angular Velocity >10°/Sec <180°/Sec
  • Assembled in the USA
  • Accuracy of ±6% when operating between 5% to 19% (Counter Clockwise)
  • Accuracy of ±2% when operating between 20% to 100% of tool capacity (Clockwise and Counter Clockwise)

Click here for more ProTronic videos.

Assembled in the USA

Warranty Information

NORBAR Products Warranty: 7.1 The Company warrants that, subject to the other provisions of these Conditions upon delivery, and for a period of 12 months after the date of delivery, the Goods will: a) be of satisfactory quality within the meaning of the Sale of Goods Act 1979; and b) comply in all material respects with the specification for them as set out in the Company€™s catalogue or other published specification current at the time that the order for the Goods was accepted by the Company. 7.2 The Company will not be liable for a breach of any of the warranties in condition 7.1 unless: a) the Buyer gives written notice of the defect to the Company within 14 days of the time when the Buyer discovers or ought to have discovered the defect; and b) the Buyer returns the defective Goods properly packed, carriage paid to the Company€™s premises at the address given in condition 1.1. 7.3 The Company will not be liable for a breach of the warranties in condition 7.1 if: a) the Buyer makes any further use of the Goods after giving such notice; or b) the Goods have been misused, mishandled, overloaded, amended, modified or repaired in any way by the Buyer or its customers, or used for any purpose other than that for which they were designed; or c) the defect is due to fair wear and tear or arises because the Buyer or its customer failed to follow the Company€™s oral or written instructions as to the storage, installation, commissioning, use or maintenance of the Goods or (if there are none) good trade practice. 7.4 Subject to conditions 7.2 and 7.3, if any of the Goods do not conform with any of the warranties in condition 7.1, the Company will at its option repair or replace such Goods (or the defective part of them) or refund the price of such Goods at the pro rata Contract rate. 7.5 If the Company complies with condition 7.4, it will have no further liability for a breach of any of the warranties in clause 7.1 in respect of such Goods. 7.6 Except as provided in condition 7.1, the Company makes no representation or warranty, whether express or implied, as to the quality or fitness for purpose of the Goods and all warranties, conditions and other terms which may be implied by statute or common law are, to the fullest extent permitted by law, excluded from the Contract. 7.7 Nothing in this Contract excludes or limits the liability of the Company for: a) death or personal injury caused by the Company€™s negligence; or b) under section 2(3) of the Consumer Protection Act 1987; or c) for fraud or fraudulent misrepresentation; or d) for any matter which it would be illegal for the Company to exclude or attempt to exclude its liability.