1/2" Dr 30 - 150 Ft Lbs / 40 - 200 Nm Norbar TW Model 200 Preset Torque Wrench - 13055

The 13055 Norbar 1/2" Dr TW Model 200 Preset Type 'Industrial' Ratchet Torque Wrench 30 - 150 Ft Lbs / 40 - 200 Nm.

P' Type Torque Wrenches are designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a torque testing device such as Norbar's Professional Torque Tester. The push-through ratchets on these models are robustly engineered for strength and durability. The strength and high wear resistance comes from a coarse tooth pattern while a principle of offset ratchet pawls gives a narrow engagement angle. The push-through square drive is not only a robust design but allows the wrench to be used for torque control in both the clockwise and anti clockwise directions, and allows for a wider model range of up to 400 N·m.

Norbar 13055 Preset Torque Wrench Features:

• Setting system is designed to discourage unauthorized alteration.
• Colored end seals are provided to identify the wrench to a particular operator, torque setting or calibration period.
• Accuracy of +/-3% of reading exceeds all international standards for torque wrenches.
• Every wrench comes supplied with a calibration certificate.
• Available with a high quality ratchet or as a 'Torque Handle'.
• Supplied in a molded box for storage and protection.
• Retained square drive will not pull out of the head when the socket is removed
• Length: 16.6"
• Square Size: 1/2"
• Weight: 2.1 Lbs
• Ratchet Teeth: 72
• Accuracy: +/-3%
• Operates between:
  • 30.0 - 150.0 lbf·ft
  • 40.0 - 200.0 N·m
• Ratchet Type: Industrial Push-Through
• Ratchet Diameter: 42 mm

 Made In England