Tohnichi Tool Set for DB Repair Click & Dial Torque Wrenches - 316

This set of pliers is used to adjust the torque for dial type torque wrenches and torque checkers. Catalog No. Applicable Models 316 DB, DBE, T-S, DOT, CDB-S

6 - 28 In Oz / 4 - 20 cNm Tohnichi Digital Torque Gauge - BTGE20CN-G

The Tohnichi BTGE20CN-G Digital Torque Gauge has a Pin Vice Holder and an English range of 6 - 28 in oz or 0.4 - 1.7 in lbs and a Metric Range of 4 - 20 cNm or .4 - 2 kgf.cm...

3 - 14 In Oz / 2 - 10 cNm Tohnichi Digital Torque Gauge - BTGE10CN-G

The Tohnichi BTGE10CN-G Digital Torque Gauge has a Pin Vice Holder and an English range of 3 - 14 in oz or 0.2 - 0.88 in lbs and a Metric Range of 2 - 10 cNm or .2 - 1 kgf.cm. ...

PIN Vise Dr .5 - 2 cNm Tohnichi Slip Type Adjustable Torque Screwdriver - AMRD2CN

The Tohnichi AMRD2CN is a Slip Type Fine Screw Adjustable Torque Screwdriver has a PIN Vise Drive and a English range of .5 - 2 cNm. Features: PIN Vice Drive and includes Standard Accessory...

450mm Tohnichi PH Pipe Wrench Head - 22DX450

The PH Pipe Wrench Head - PH22DX450Tohnichi's interchangeable head wrenches have specific diameter round ends that fit into corresponding head base openings. Head and wrench model names include the...

2.7 - 13.2 In Lbs / 0.3 - 1.5Nm Tohnichi Interchangeable Head Preset Torque Wrench - 1.5N4x8D

The Interchangeable Head Preset Torque Wrench - CSP1.5N4x8DThe Tohnichi 1.5N4x8D preset torque wrench is compatible with interchangeable heads and features an English range of 2.7-13.2 in lbs...

1/4" Dr 1 - 4.4 In LBS Tohnichi Digital Torque Screwdriver - STC50CN2-G

The Tohnichi STC50CN2-G Digital Torque Screwdriver has a 1/4" Hex Bit Holder and an English range of 1-4.4 In Lbs and 15-70 In Oz and a Metric Range of 10-50 cNm or 1-5 kgf.cm. ...

PIN Vise Dr 1 - 3 In Oz Tohnichi Slip Type Adjustable Torque Screwdriver - AMRD3Z

The Tohnichi AMRD3Z is a Slip Type Fine Screw Adjustable Torque Screwdriver with a PIN Vise Drive and a English range of 1-3 In Oz. Features: PIN Vise Drive and includes Standard Accessory Bits...

2 - 8.8 In Lbs / 20 - 100 cNm Tohnichi Digital Torque Gauge - BTGE100CN-G

The Tohnichi BTGE100CN-G digital torque gauge has a pin vise holder and an English range of 15-70 in oz or 2-8.8 in lbs and a Metric range of 20-100 cNm or 2-10 kgf.cm. Includes Tohnichi...

15 - 70 In Oz / 10 - 50 cNm Tohnichi Digital Torque Gauge - BTGE50CN-G

The Tohnichi BTGE50CN-G digital torque gauge has a pin vise holder and an English range of 15-70 in oz or 1-4.4 in lbs and a metric range of 10-50 cNm or 1-5 kgf.cm. Includes Tohnichi Factory...

350mm Tohnichi PH Pipe Wrench Head - PH22DX350

The PH Pipe Wrench Head has a Minimum mouth width of 13mm and a Maximum mouth width of 38mm - PH22DX350Tohnichi's interchangeable head wrenches have specific diameter round ends that fit into...

PIN Vise Dr 2 - 6 In Oz Tohnichi Slip Type Adjustable Torque Screwdriver - AMRD6Z

The Tohnichi AMRD6Z Adjustable Torque Screwdriver is made with a 1/4" Drive and an English range of 2-6 Inch Ounces. Features:  Same features as RTD except designed for smaller screws PIN...