|
|
|
Drive:
3/8"
Torque Range in. lb.:
120 - 1200 in.lb
Torque Range ft. lb.:
10.0 - 100.0
Torque Range Nm:
13.6 - 135.6
Torque Range Kg.Cm.:
138 - 1382
Length In. (mm) :
17 (432)
Wt. Lbs. (kgs):
2.2 (1.0)
- Sleek new design
- 15-degree fl ex ratcheting head
- Push button socket release head
- Large, easy to read digital display
- Long battery life, uses 2 each CR123 lithium batteries
- Ergonomically designed molded non-slip rubber grip
- Torques in both clockwise and counterclockwise directions
- Battery saving auto-shutoff after two minutes
- COMPUTORQ3 remembers last unit and torque setting selected
- Audible tone sounds when set torque value is reached, if the set torque value is exceeded, an alarm tone will sound.
- 3 color LED light bar YELLOW LED indicates approaching desired torque setting GREEN LED indicates desired torque value is reached RED LED indicates fastener was over-torqued, loosen and retighten.
- When desired torque value is reached, display will hold value and flash for ten seconds.
- COMPUTORQ3 will operate in any of four torque units, foot pounds (ft. lbs.), inch pounds (in. lbs.), newton meter (Nm) or kilogram centimeter (kg. cm.).
- ACCURACY:
± 2% CW of readings from 20% to 100% of full scale
± 3% CCW of readings from 20% to 100% of full scale - N.I.S.T. traceable certificate of calibration included. HIGH ACCURACY 1 % Clockwise direction only. >
|
|
|
|
CDI Computorq 3 Electronic Torque Wrench High Accuracy 3/8" Dr 10-100 ft. lbs. |
|
Item# 1002CF3HA |
|
UPC# 662459937704
|
|
CDI 1002CF3HA COMPUTORQ3 High Accuracy Electronic Torque Wrench with 3/8" drive. This digital torque wrench as range of 10-100 Ft. Lb. Simple to use digital readout wrench that displays real time torque values in any of four torque units, ft.lbs., in.lbs., Nm, kg.cm. Simply set the desired torque value and apply force until the green LED illuminates. Great for light industrial, automotive, motorcycle, watercraft and aircraft applications.
Made in the USA.
|
|
