Product Description
The Norbar EvoTorque 2 Electronic Torque Multiplier 180236.B12 has a 1 1/2'' Drive and provides a range of 1030 - 5200 Ft Lbs or 700-7000 Nm. The EvoTorque® 2 Norbar torque multiplier is an electronic torque tool designed for accurately applying torque to threaded fasteners. Tools are factory calibrated to ±3% of reading. The unique ‘intelligent joint sensing’ technology continually measures the joint during tightening and, when necessary, employs dynamic braking to avoid torque over-shoot due to motor inertia. Consequently, EvoTorque® can apply torque accurately over a wide range of joint rates from hard (high torque rate) through to soft (low torque rate). All EvoTorque® tools are highly tolerant of supply voltage and frequency variation. When the tool runs, it will run accurately. If the supply voltage is outside of tolerance then, as a safety feature, the tool will be prevented from starting.
The EvoTorque® 2 has the ability to memorise multiple targets, work IDs, user IDs and readings. The Norbar torque multiplier has three modes of operation: Torque, Torque and Angle and Torque Audit. The unique Audit Mode is a sophisticated feature for testing pre-tightened bolts with minimal impact on the original fastening torque and can provide quality control data for monitoring joint performance over time.
Features:
- USB and Bluetooth® 4.0 data transfer (also called Bluetooth® Smart)
- Torque and Torque & Angle modes
- New Audit Torque Mode enables users to check pre-tightened joints
- Clear indication of successful joint application
- OLED, colour display, clearly visible even in poor lighting
- 3000 reading memory, time and date stamped
- Results uploaded in real time
- Complimentary PC software 'EvoLog' for data management and tool configuration
- 12 user IDs can be downloaded to the tool and results can be stored against individual users
- Capacity for setting 20 stand-alone targets plus up to 5 work groups on the tool
- Multiple units of torque measurement including N.m, lbf.ft, ft.lb and kgf.m
- Easily removable secondary handle for balanced handling of the tool
- New steel reaction as standard and aluminium reactions as optional accessories
- Rated to IP44 for dust and water ingress
- Each tool is supplied with a traceable calibration certificate
- 1 1/2" Square Drive
- 3.3 rpm
- Tool Weight of 16.8kg
- Calibrated to 20% - 100% of tool's maximum capacity
- Operational targets can be set from 10% of tool capacity
